I2NSF Working Group J. Jeong
Internet-Draft C. Chung
Intended status: Standards Track Sungkyunkwan University
Expires: May 7, 2020 T. Ahn
Korea Telecom
R. Kumar
Juniper Networks
S. Hares
Huawei
November 4, 2019
I2NSF Consumer-Facing Interface YANG Data Model
draft-ietf-i2nsf-consumer-facing-interface-dm-07
Abstract
This document describes an information model and a YANG data model
for the Consumer-Facing Interface between an Interface to Network
Security Functions (I2NSF) User and Security Controller in an I2NSF
system in a Network Functions Virtualization (NFV) environment. The
information model defines various types of managed objects and the
relationship among them needed to build the interface. The
information model is organized based on the "Event-Condition-Action"
(ECA) policy model defined by a capability information model for
I2NSF [i2nsf-capability-im], and the data model is defined for
enabling different users of a given I2NSF system to define, manage,
and monitor security policies for specific flows within an
administrative domain.
Status of This Memo
This Internet-Draft is submitted in full conformance with the
provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet-
Drafts is at https://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
This Internet-Draft will expire on May 7, 2020.
Jeong, et al. Expires May 7, 2020 [Page 1]
Internet-Draft Consumer-Facing Interface YANG Data Model November 2019
Copyright Notice
Copyright (c) 2019 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(https://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 3
2. Requirements Language . . . . . . . . . . . . . . . . . . . . 5
3. Terminology . . . . . . . . . . . . . . . . . . . . . . . . . 5
4. Information Model for Policy . . . . . . . . . . . . . . . . 5
4.1. Event Sub-model . . . . . . . . . . . . . . . . . . . . . 7
4.2. Condition Sub-model . . . . . . . . . . . . . . . . . . . 8
4.3. Action Sub-model . . . . . . . . . . . . . . . . . . . . 9
5. Information Model for Policy Endpoint Groups . . . . . . . . 10
5.1. User Group . . . . . . . . . . . . . . . . . . . . . . . 10
5.2. Device Group . . . . . . . . . . . . . . . . . . . . . . 11
5.3. Location Group . . . . . . . . . . . . . . . . . . . . . 12
6. Information Model for Threat Prevention . . . . . . . . . . . 13
6.1. Threat Feed . . . . . . . . . . . . . . . . . . . . . . . 13
6.2. Payload Content . . . . . . . . . . . . . . . . . . . . . 14
7. Network Configuration Access Control Model (NACM) . . . . . . 15
8. YANG Data Model of Consumer-Facing Interface . . . . . . . . 15
9. XML Configuration Examples of High-Level Security Policy
Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
9.1. Database Registration: Information of Positions and
Devices (Endpoint Group) . . . . . . . . . . . . . 36
9.2. Scenario 1: Block SNS Access during Business Hours . . . 37
9.3. Scenario 2: Block Malicious VoIP/VoLTE Packets Coming to
a Company . . . . . . . . . . . . . . . . . . . . . . . . 39
9.4. Scenario 3: Mitigate HTTP and HTTPS Flood Attacks on a
Company Web Server . . . . . . . . . . . . . . . . . . . 40
10. Security Considerations . . . . . . . . . . . . . . . . . . . 42
11. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 42
12. Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . 42
13. Contributors . . . . . . . . . . . . . . . . . . . . . . . . 42
14. References . . . . . . . . . . . . . . . . . . . . . . . . . 44
14.1. Normative References . . . . . . . . . . . . . . . . . . 44
Jeong, et al. Expires May 7, 2020 [Page 2]
Internet-Draft Consumer-Facing Interface YANG Data Model November 2019
14.2. Informative References . . . . . . . . . . . . . . . . . 45
Appendix A. Changes from draft-ietf-i2nsf-consumer-facing-
interface-dm-06 . . . . . . . . . . . . . . . . . . 47
Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 47
1. Introduction
In a framework of Interface to Network Security Functions (I2NSF),
each vendor can register their NSFs using a Developer's Management
System (DMS). Assuming that vendors also provide the front-end web
applications registered with an I2NSF User, the Consumer-Facing
Interface is required because the web applications developed by each
vendor need to have a standard interface specifying the data types
used when the I2NSF User and Security Controller communicate using
this interface. Therefore, this document specifies the required
information, their data types, and encoding schemes so that high-
level security policies (or configuration information for security
policies) can be transferred to the Security Controller through the
Consumer-Facing Interface. These policies can easily be translated
by the Security Controller into low-level security policies. The
Security Controller delivers the translated policies to Network
Security Functions (NSFs) according to their respective security
capabilities for the required securiy enforcement.
The Consumer-Facing Interface would be built using a set of objects,
with each object capturing a unique set of information from Security
Administrator (i.e., I2NSF User [RFC8329]) needed to express a
Security Policy. An object may have relationship with various other
objects to express a complete set of requirements. An information
model captures the managed objects and relationship among these
objects. The information model proposed in this document is
structured in accordance with the "Event-Condition-Action" (ECA)
policy model.
An NSF Capability model is proposed in [i2nsf-capability-im] as the
basic model for both the NSF-Facing interface and Consumer-Facing
Interface security policy model of this document.
[RFC3444] explains differences between an information and data model.
This document uses the guidelines in [RFC3444] to define both the
information and data model for Consumer-Facing Interface. Figure 1
shows a high-level abstraction of Consumer-Facing Interface. A data
model, which represents an implementation of the information model in
a specific data representation language, is also defined in this
document.
Jeong, et al. Expires May 7, 2020 [Page 3]
Internet-Draft Consumer-Facing Interface YANG Data Model November 2019
+-----------------+ +-----------------+
| Consumer-Facing | | Consumer-Facing |
| Interface +--->+ Interface |
|Information Model| | Data Model |
+--------+--------+ +-----------------+
^
|
+-------------+------------+
| | |
+-----+----+ +-----+----+ +----+----+
| Policy | | Endpoint | | Threat |
| | | groups | | feed |
+-----+----+ +----------+ +---------+
^
|
+------+------+
| Rule |
+------+------+
^
|
+----------------+----------------+
| | |
+------+------+ +------+------+ +------+------+
| Event | | Condition | | Action |
+-------------+ +-------------+ +-------------+
Figure 1: Diagram for High-level Abstraction of Consumer-Facing
Interface
Data models are defined at a lower level of abstraction and provide
many details. They provide details about the implementation of a
protocol's specification, e.g., rules that explain how to map managed
objects onto lower-level protocol constructs. Since conceptual
models can be implemented in different ways, multiple data models can
be derived from a single information model.
The efficient and flexible provisioning of network functions by a
Network Functions Virtualization (NFV) system leads to a rapid
advance in the network industry. As practical applications, Network
Security Functions (NSFs), such as firewall, Intrusion Detection
System (IDS)/Intrusion Prevention System (IPS), and attack
mitigation, can also be provided as Virtual Network Functions (VNF)
in the NFV system. By the efficient virtualization technology, these
VNFs might be automatically provisioned and dynamically migrated
based on real-time security requirements. This document presents a
YANG data model to implement security functions based on NFV.
Jeong, et al. Expires May 7, 2020 [Page 4]
Internet-Draft Consumer-Facing Interface YANG Data Model November 2019
2. Requirements Language
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in RFC 2119 [RFC3444]
RFC8174 [RFC8174].
3. Terminology
This document uses the terminology described in [i2nsf-terminology]
[client-facing-inf-req].
This document follows the guidelines of [RFC8407], uses the common
YANG types defined in [RFC6991], and adopts the Network Management
Datastore Architecture (NMDA). The meaning of the symbols in tree
diagrams is defined in [RFC8340].
4. Information Model for Policy
A Policy object represents a mechanism to express a Security Policy
by Security Administrator (i.e., I2NSF User) using Consumer-Facing
Interface toward Security Controller; the policy would be enforced on
an NSF. Figure 2 shows the YANG tree of the Policy object. The
Policy object SHALL have the following information:
Name: This field identifies the name of this object.
Date: Date when this object was created or last modified.
Rule: This field contains a list of rules. These rules are
defined for 1) communication between two Endpoint Groups,
2) for preventing communication with externally or
internally identified threats, and 3) for implementing
business requirement such as controlling access to internal
or external resources for meeting regulatory compliance or
business objectives. An organization may restrict certain
communication between a set of user and applications for
example. The threats may be from threat feeds obtained
from external sources or dynamically identified by using
specialty devices in the network. Rule conflict analysis
should be triggered by the monitoring service to perform an
exhaustive detection of anomalies among the configuration
rules installed into the security functions.
Jeong, et al. Expires May 7, 2020 [Page 5]
Internet-Draft Consumer-Facing Interface YANG Data Model November 2019
+--rw i2nsf-cfi-policy* [policy-name]
+--rw policy-name string
| +--rw rule* [rule-name]
+--rw endpoint-group
+--rw threat-prevention
Figure 2: Policy YANG Data Tree
A policy is a container of Rule. In order to express a Rule, a Rule
must have complete information such as where and when a policy needs
to be applied. This is done by defining a set of managed objects and
relationship among them. A Policy Rule may be related segmentation,
threat mitigation or telemetry data collection from an NSF in the
network, which will be specified as the sub-model of the policy model
in the subsequent sections. Figure 3 shows the YANG data tree of the
Rule object. The rule object SHALL have the following information:
Name: This field identifies the name of this object.
Event: This field includes the information to determine whether
the Rule Condition can be evaluated or not. See details in
Section 4.1.
Condition: This field contains all the checking conditions to
apply to the objective traffic. See details in
Section 4.2.
Action: This field identifies the action taken when a rule is
matched. There is always an implicit action to drop
traffic if no rule is matched for a traffic type. See
details in Section 4.3.
IPsec-Method: This field contains the information about IPsec
method type. There are two types such as IPsec-IKE and
IPsec-IKEless [i2nsf-ipsec].
Owner: This field contains the onwer of the rule. For example,
the person who created it, and eligible for modifying it.
Jeong, et al. Expires May 7, 2020 [Page 6]
Internet-Draft Consumer-Facing Interface YANG Data Model November 2019
+--rw rule* [rule-name]
+--rw rule-name string
+--rw event
+--rw (condition)?
+--rw action
+--rw ipsec-method
+--rw owner identityref
Figure 3: Rule YANG Data Tree
4.1. Event Sub-model
The Event Object contains information related to scheduling a Rule.
The Rule could be activated based on a set time or security event.
Figure 4 shows the YANG tree of the Event object. Event object SHALL
have following information:
Security-event: This field identifies for which security event
the policy is enforced. The examples of security events
are: "DDOS", "spyware", "trojan", and "ransomware".
Enforce-type: This field identifies whether the event of
triggering policy enforcement is "Admin" or "Time".
Admin: This represents the enforcement type based on admin's
decision.
Time: This represents the security rule is enforced based on
begin-time and end-time information.
Frequency: This represents how frequent the rule should be
enforced. There are four options: "only-once", "daily",
"weekly" and "monthly".
+--rw event
+--rw security-event identityref
+--rw (enforce-type)?
| +--:(admin)
| | +--rw admin? identityref
| +--:(time)
| +--rw time-information
| +--rw begin-time? yang:date-and-time
| +--rw end-time? yang:date-and-time
+--rw frequency? enumeration
Figure 4: Event Sub-model YANG Data Tree
Jeong, et al. Expires May 7, 2020 [Page 7]
Internet-Draft Consumer-Facing Interface YANG Data Model November 2019
4.2. Condition Sub-model
This object represents Conditions that Security Administrator wants
to apply the checking on the traffic in order to determine whether
the set of actions in the Rule can be executed or not. The Condition
Sub-model consists of three different types of containers each
representing different cases, such as general firewall and DDoS-
mitigation cases, and a case when the condition is based on the
payload strings of packets. Each containers have source-target and
destination-target to represent the source and destination for each
case. Figure 5 shows the YANG tree of the Condition object. The
Condition Sub-model SHALL have following information:
Case (Firewall-condition): This field represents the general
firewall case, where a security admin can set up firewall
conditions using the information present in this field.
The source and destination is represented as firewall-
source and firewall-destination, each referring to the IP-
address-based groups defined in the endpoint-group.
Case (DDoS-condition): This field represents the condition for
DDoS mitigation, where a security admin can set up DDoS
mitigation conditions using the information present in this
field. The source and destination is represented as ddos-
source and ddos-destination, each referring to the device-
groups defined and registered in the endpoint-group.
Case (Custom-condition): This field contains the payload string
information. This information is useful when security rule
condition is based on the string contents of incoming or
outgoing packets. The source and destination is
represented as custom-source and custom-destination, each
referring to the payload-groups defined and registered in
the endpoint-group.
Case (Threat-feed-condition): This field contains the information
obtained from threat-feeds (e.g., Palo-Alto, or RSA-
netwitness). This information is useful when security rule
condition is based on the existing threat reports gathered
by other sources. The source and destination is
represented as threat-feed-source and threat-feed-
destination. For clarity, threat-feed-source/destination
represent the source/destination of a target security
threat, not the information source/destination of a threat-
feed.
Jeong, et al. Expires May 7, 2020 [Page 8]
Internet-Draft Consumer-Facing Interface YANG Data Model November 2019
+--rw (condition)?
+--:(firewall-condition)
| +--rw firewall-source
| | +--rw src-target -> /../../nacm:group/nacm:user-name
| +--rw firewall-destination
| +--rw dest-target* -> /../../nacm:group/nacm:user-name
+--:(ddos-condition)
| +--rw ddos-source
| | +--rw src-target* -> /../../device-group/name
| +--rw ddos-destination
| | +--rw dest-target* -> /../../device-group/name
| +--rw rate-limit
| +--rw packet-per-second? uint16
+--:(custom-condition)
| +--rw custon-source
| | +--rw src-target* -> /../../payload-content/name
| +--rw custom-destination
| +--rw dest-target -> /../../payload-content/name
+--:(threat-feed-condition)
+--rw threat-feed-source
| +--rw src-target* -> /../../threat-feed-list/feed-name
+--rw threat-feed-destination
+--rw dest-target -> /../../threat-feed-list/feed-name
Figure 5: Condition Sub-model YANG Data Tree
4.3. Action Sub-model
This object represents actions that Security Admin wants to perform
based on certain traffic class. Figure 6 shows the YANG tree of the
Action object. The Action object SHALL have following information:
Primary-action: This field identifies the action when a rule is
matched by an NSF. The action could be one of "PASS",
"DROP", "ALERT", "RATE-LIMIT", and "MIRROR".
Secondary-action: This field identifies the action when a rule is
matched by an NSF. The action could be one of "log",
"syslog", "session-log".
+--rw action
+--rw primary-action identityref
+--rw secondary-action? identityref
Figure 6: Action Sub-model YANG Data Tree
Jeong, et al. Expires May 7, 2020 [Page 9]
Internet-Draft Consumer-Facing Interface YANG Data Model November 2019
5. Information Model for Policy Endpoint Groups
The Policy Endpoint Group is a very important part of building User-
Construct based policies. A Security Administrator would create and
use these objects to represent a logical entity in their business
environment, where a Security Policy is to be applied. There are
multiple managed objects that constitute a Policy's Endpoint Group as
shown in Figure 7. Figure 8 shows the YANG tree of the Endpoint-
Group object. This section lists these objects and relationship
among them.
+-------------------+
| Endpoint Group |
+---------+---------+
^
|
+--------------+----------------+
1..n | 1..n | 1..n |
+-----+----+ +------+-----+ +-------+------+
|User-group| |Device-group| |Location-group|
+----------+ +------------+ +--------------+
Figure 7: Endpoint Group Diagram
+--rw endpoint-group
+--rw user-group* [name]
...
+--rw device-group* [name]
...
+--rw location-group* [name]
...
Figure 8: Endpoint Group YANG Data Tree
5.1. User Group
This object represents a User-Group. Figure 9 shows the YANG tree of
the User-Group object. The User-Group object SHALL have the
following information:
Name: This field identifies the name of this object.
IP-address: This represents the IPv4 address of a user in the
user group.
Jeong, et al. Expires May 7, 2020 [Page 10]
Internet-Draft Consumer-Facing Interface YANG Data Model November 2019
range-ipv4-address: This represents the IPv4 address of a user in
the user gorup.
range-ipv6-address: This represents the IPv6 address of a user in
the user gorup.
+--rw user-group* [name]
+--rw name -> /../../nacm:group/nacm:user-name
+--rw (match-type)?
+--:(exact-match-ipv4)
| +--rw ip-address* inet:ipv4-address
+--:(exact-match-ipv6)
| +--rw ip-address* inet:ipv4-address
+--:(range-match-ipv4)
| +--rw range-ipv4-address*
[start-ipv4-address end-ipv4-address]
| +--rw start-ipv4-address inet:ipv4-address
| +--rw end-ipv4-address inet:ipv4-address
+--:(range-match-ipv6)
+--rw range-ipv6-address*
[start-ipv6-vaddress end-ipv6-address]
+--rw start-ipv6-address inet:ipv6-address
+--rw end-ipv6-address inet:ipv6-address
Figure 9: User Group YANG Data Tree
5.2. Device Group
This object represents a Device-Group. Figure 10 shows the YANG tree
of the Device-group object. The Device-Group object SHALL have the
following information:
Name: This field identifies the name of this object.
IP-address: This represents the IPv4 address of a device in the
device group.
range-ipv4-address: This represents the IPv4 address of a device
in the device gorup.
range-ipv6-address: This represents the IPv6 address of a device
in the device gorup.
Protocol: This represents the communication protocols used by the
devices. The protocols are "SSH", "FTP", "SMTP", "HTTP",
"HTTPS", and etc.
Jeong, et al. Expires May 7, 2020 [Page 11]
Internet-Draft Consumer-Facing Interface YANG Data Model November 2019
+--rw device-group* [name]
+--rw name string
+--rw (match-type)?
| +--:(exact-match-ipv4)
| | +--rw ip-address* inet:ipv4-address
| +--:(exact-match-ipv6)
| | +--rw ip-address* inet:ipv4-address
| +--:(range-match-ipv4)
| | +--rw range-ipv4-address*
[start-ipv4-address end-ipv4-address]
| | +--rw start-ipv4-address inet:ipv4-address
| | +--rw end-ipv4-address inet:ipv4-address
| +--:(range-match-ipv6)
| +--rw range-ipv6-address*
[start-ipv6-vaddress end-ipv6-address]
| +--rw start-ipv6-address inet:ipv6-address
| +--rw end-ipv6-address inet:ipv6-address
+--rw protocol identityref
Figure 10: Device Group YANG Data Tree
5.3. Location Group
This object represents a location group based on either tag or other
information. Figure 11 shows the YANG tree of the Location-Group
object. The Location-Group object SHALL have the following
information:
Name: This field identifies the name of this object.
geo-ip-ipv4: This field represents the IPv4 Geo-ip of a location.
geo-ip-ipv6: This field represents the IPv6 Geo-ip of a location.
continent: This field represents the continent where the location
group member is at.
+--rw location-group* [name]
+--rw name string
+--rw geo-ip-ipv4 inet:ipv4-address
+--rw geo-ip-ipv6 inet:ipv6-address
+--rw continent? identityref
Figure 11: Location Group YANG Data Tree
Jeong, et al. Expires May 7, 2020 [Page 12]
Internet-Draft Consumer-Facing Interface YANG Data Model November 2019
6. Information Model for Threat Prevention
The threat prevention plays an important part in the overall security
posture by reducing the attack surfaces. This information could come
from various threat feeds (i.e., sources for obtaining the threat
information). There are multiple managed objects that constitute
this category. This section lists these objects and relationship
among them. Figure 13 shows the YANG tree of a Threat-Prevention
object.
+-------------------+
| Threat Prevention |
+---------+---------+
^
|
+---------+---------+
1..n | 1..n |
+------+------+ +--------+--------+
| Threat-feed | | payload-content |
+-------------+ +-----------------+
Figure 12: Threat Prevention Diagram
+--rw threat-prevention
+--rw threat-feed-list* [name]
...
+--rw payload-content* [name]
...
Figure 13: Threat Prevention YANG Data Tree
6.1. Threat Feed
This object represents a threat feed which provides signatures of
malicious activities. Figure 14 shows the YANG tree of a Threat-
feed-list. The Threat-Feed object SHALL have the following
information:
Feed-name: This field identifies the name of this object.
Feed-Server-ipv4: This represents the IPv4 server address of the
feed provider, it may be external or local servers.
Feed-Server-ipv6: This represents the IPv6 server address of the
feed provider, it may be external or local servers.
Jeong, et al. Expires May 7, 2020 [Page 13]
Internet-Draft Consumer-Facing Interface YANG Data Model November 2019
Feed-description: This is the description of the threat feed.
The descriptions should have clear indication of the
security attack such as attack type (e.g., APT) and file
types used (e.g., executable malware).
Threat-file-types: This field identifies the information about
the file types identified and reported by the threat-feed.
signatures: This field contains the signatures of malicious
programs or activities provided by the threat-feed. The
examples of signature types are "YARA", "SURICATA", and
"SNORT".
+--rw threat-prevention
+--rw threat-feed-list* [feed-name]
+--rw feed-name identityref
+--rw feed-server-ipv4? inet:ipv4-address
+--rw feed-server-ipv6? inet:ipv6-address
+--rw feed-description? string
+--rw threat-file-types* identityref
+--rw signatures* identityref
Figure 14: Threat Feed YANG Data Tree
6.2. Payload Content
This object represents a custom list created for the purpose of
defining exception to threat feeds. Figure 15 shows the YANG tree of
a Payload-content list. The Payload-Content object SHALL have the
following information:
Name: This field identifies the name of this object. For
example, the name "backdoor" indicates the payload content
is related to backdoor attack.
payload-description: This represents the description of how the
payload content is related to a security attack.
Content: This contains the payload contents, which are involed in
a security attack, as strings.
Jeong, et al. Expires May 7, 2020 [Page 14]
Internet-Draft Consumer-Facing Interface YANG Data Model November 2019
+--rw payload-content* [name]
+--rw name string
+--rw payload-description string
+--rw content* string
Figure 15: Payload Content in YANG Data Tree
7. Network Configuration Access Control Model (NACM)
Network Configuration Access Control Model (NACM) provides a high-
level overview of the access control with the following features
[RFC8341]:
o Independent control of action, data, and notification access is
provided.
o A simple and familiar set of datastore permissions is used.
o Support for YANG security tagging allows default security modes to
automatically exclude sensitive data.
o Separate default access modes for read, write, and execute
permissions are provided.
o Access control rules are applied to configurable groups of users.
The data model for the I2NSF Consumer-Facing Interface provides NACM
mechanisms and concepts to user-group and owners permissions. The
NACM with the above features can be used to set up all the management
access controls in the I2NSF high-level authorization view, and it
may have a high impact on the optimization and performance.
8. YANG Data Model of Consumer-Facing Interface
The main objective of this data model is to provide both an
information model and the corresponding YANG data model of I2NSF
Consumer-Facing Interface. This interface can be used to deliver
control and management messages between an I2NSF User and Security
Controller for the I2NSF User's high-level security policies.
The semantics of the data model must be aligned with the information
model of the Consumer-Facing Interface. The transformation of the
information model was performed so that this YANG data model can
facilitate the efficient delivery of the control or management
messages.
Jeong, et al. Expires May 7, 2020 [Page 15]
Internet-Draft Consumer-Facing Interface YANG Data Model November 2019
This data model is designed to support the I2NSF framework that can
be extended according to the security needs. In other words, the
model design is independent of the content and meaning of specific
policies as well as the implementation approach. This document
suggests a VoIP/VoLTE security service as a use case for policy rule
generation.
This section describes a YANG data model for Consumer-Facing
Interface, based on the information model of Consumer-Facing
Interface to Security Controller.
<CODE BEGINS> file "ietf-i2nsf-cfi-policy@2019-11-04.yang"
module ietf-i2nsf-cfi-policy {
yang-version 1.1;
namespace
"urn:ietf:params:xml:ns:yang:ietf-i2nsf-cfi-policy";
prefix
cfi-policy;
import ietf-yang-types{
prefix yang;
reference
"Section 3 of RFC 6991";
}
import ietf-inet-types{
prefix inet;
reference
"Section 4 of RFC 6991";
}
import ietf-netconf-acm {
prefix nacm;
}
organization
"IETF I2NSF (Interface to Network Security Functions)
Working Group";
contact
"WG Web: <http://tools.ietf.org/wg/i2nsf>
WG List: <mailto:i2nsf@ietf.org>
WG Chair: Linda Dunbar
<mailto:Linda.duhbar@huawei.com>
WG Chair: Yoav Nir
Jeong, et al. Expires May 7, 2020 [Page 16]
Internet-Draft Consumer-Facing Interface YANG Data Model November 2019
<mailto:ynir.ietf@gmail.com>
Editor: Jaehoon Paul Jeong
<mailto:pauljeong@skku.edu>
Editor: Chaehong Chung
<mailto:darkhong@skku.edu>";
description
"This module is a YANG module for Consumer-Facing Interface.
Copyright (c) 2018 IETF Trust and the persons identified as
authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with or
without modification, is permitted pursuant to, and subject
to the license terms contained in, the Simplified BSD License
set forth in Section 4.c of the IETF Trust's Legal Provisions
Relating to IETF Documents
(http://trustee.ietf.org/license-info).
This version of this YANG module is part of RFC XXXX; see
the RFC itself for full legal notices.";
revision "2019-11-04"{
description "The latest revision";
reference
"draft-ietf-consumer-facing-interface-dm-07";
}
identity malware-file-type {
description
"Base identity for malware file types.";
}
identity executable-file {
base malware-file-type;
description
"Identity for executable file types.";
}
identity doc-file {
base malware-file-type;
description
"Identity for Microsoft document file types.";
}
identity html-app-file {
base malware-file-type;
description
"Identity for html application file types.";
}
identity javascript-file {
Jeong, et al. Expires May 7, 2020 [Page 17]
Internet-Draft Consumer-Facing Interface YANG Data Model November 2019
base malware-file-type;
description
"Identity for Javascript file types.";
}
identity pdf-file {
base malware-file-type;
description
"Identity for pdf file types.";
}
identity dll-file {
base malware-file-type;
description
"Identity for dll file types.";
}
identity msi-file {
base malware-file-type;
description
"Identity for Microsoft installer file types.";
}
identity security-event-type {
description
"Base identity for security event types.";
}
identity ddos {
base malware-file-type;
description
"Identity for DDoS event types.";
}
identity spyware {
base malware-file-type;
description
"Identity for spyware event types.";
}
identity trojan {
base malware-file-type;
description
"Identity for Trojan infection event types.";
}
identity ransomware {
base malware-file-type;
description
"Identity for ransomware infection event types.";
}
identity i2nsf-ipsec {
description
"Base identity for IPsec method types.";
Jeong, et al. Expires May 7, 2020 [Page 18]
Internet-Draft Consumer-Facing Interface YANG Data Model November 2019
}
identity ipsec-ike {
base i2nsf-ipsec;
description
"Identity for ipsec-ike.";
}
identity ipsec-ikeless {
base i2nsf-ipsec;
description
"Identity for ipsec-ikeless.";
}
identity continent {
description
"Base Identity for continent types.";
}
identity africa {
base continent;
description
"Identity for africa.";
}
identity asia {
base continent;
description
"Identity for asia.";
}
identity europe {
base continent;
description
"Identity for europe.";
}
identity north-america {
base continent;
description
"Identity for north-america.";
}
identity south-america {
base continent;
description
"Identity for south-america.";
}
identity oceania {
base continent;
description
"Identity for Oceania";
}
Jeong, et al. Expires May 7, 2020 [Page 19]
Internet-Draft Consumer-Facing Interface YANG Data Model November 2019
identity enforce-type {
description
"This identity represents the event of
policy enforcement trigger type.";
}
identity admin {
base enforce-type;
description
"The identity for policy enforcement by admin.";
}
identity time {
base enforce-type;
description
"The identity for policy enforcement based on time.";
}
identity protocol-type {
description
"This identity represents the protocol types.";
}
identity ftp {
base protocol-type;
description
"The identity for ftp protocol.";
}
identity ssh {
base protocol-type;
description
"The identity for ssh protocol.";
}
identity telnet {
base protocol-type;
description
"The identity for telnet.";
}
identity smtp {
base protocol-type;
description
"The identity for smtp.";
}
identity sftp {
base protocol-type;
description
"The identity for sftp.";
}
identity http {
base protocol-type;
description
Jeong, et al. Expires May 7, 2020 [Page 20]
Internet-Draft Consumer-Facing Interface YANG Data Model November 2019
"The identity for http.";
}
identity https {
base protocol-type;
description
"The identity for https.";
}
identity pop3 {
base protocol-type;
description
"The identity for pop3.";
}
identity nat {
base protocol-type;
description
"The identity for nat.";
}
identity primary-action {
description
"This identity represents the primary actions, such as
PASS, DROP, ALERT, RATE-LIMIT, and MIRROR.";
}
identity pass {
base primary-action;
description
"The identity for pass.";
}
identity drop {
base primary-action;
description
"The identity for drop.";
}
identity alert {
base primary-action;
description
"The identity for alert.";
}
identity rate-limit {
base primary-action;
description
"The identity for rate-limit.";
}
identity mirror {
base primary-action;
description
"The identity for mirroring.";
}
Jeong, et al. Expires May 7, 2020 [Page 21]
Internet-Draft Consumer-Facing Interface YANG Data Model November 2019
identity secondary-action {
description
"This field identifies additional actions if a rule is
matched. This could be one of 'LOG', 'SYSLOG',
'SESSION-LOG', etc.";
}
identity log {
base secondary-action;
description
"The identity for logging.";
}
identity syslog {
base secondary-action;
description
"The identity for system logging.";
}
identity session-log {
base secondary-action;
description
"The identity for session logging.";
}
identity owner {
description
"This is the base identity for the owner";
}
identity dept-head {
base owner;
description
"This represents the identity of the head of department.";
}
identity manager {
base owner;
description
"This represents the identity of the manager of the department.";
}
identity employee {
base owner;
description
"This represents the identity of department employees.";
}
identity sec-head {
base owner;
description
"This represents the identity of the head of security.";
}
identity sec-admin {
base owner;
Jeong, et al. Expires May 7, 2020 [Page 22]
Internet-Draft Consumer-Facing Interface YANG Data Model November 2019
description
"This represents the identity of security admin.";
}
identity signature-type {
description
"This represents the base identity for signature types.";
}
identity signature-yara {
base signature-type;
description
"This represents the YARA signatures.";
}
identity signature-snort {
base signature-type;
description
"This represents the SNORT signatures.";
}
identity signature-suricata {
base signature-type;
description
"This represents the SURICATA signatures.";
}
identity threat-feed-type {
description
"This represents the base identity for threat-feed.";
}
identity palo-alto {
base threat-feed-type;
description
"This represents Palo-Alto threat-feed.";
}
identity rsa-netwitness {
base threat-feed-type;
description
"This represents RSA-netwitness threat-feed.";
}
identity fireeye {
base threat-feed-type;
description
"This represents FireEye threat-feed.";
}
identity alienvault {
base threat-feed-type;
description
"This represents Alienvault threat-feed.";
}
Jeong, et al. Expires May 7, 2020 [Page 23]
Internet-Draft Consumer-Facing Interface YANG Data Model November 2019
/*
* Groupings
*/
grouping ipv4-list {
description
"Grouping for ipv4 based ip-addresses.";
leaf-list ipv4 {
type inet:ipv4-address;
description
"This is the entry for the ipv4 ip-addresses.";
}
}
grouping ipv6-list {
description
"Grouping for ipv6 based ip-addresses.";
leaf-list ipv6 {
type inet:ipv6-address;
description
"This is the entry for the ipv6 ip-addresses.";
}
}
grouping ipv4 {
description
"Grouping for ipv4 based ip-address.";
leaf ipv4 {
type inet:ipv4-address;
description
"This is the entry for the ipv4 ip-address.";
}
}
grouping ipv6 {
description
"Grouping for ipv6 based ip-address.";
leaf ipv6 {
type inet:ipv6-address;
description
"This is the entry for the ipv6 ip-address.";
}
}
grouping ip-address-info {
description
"There are two types to configure a security policy
for IPv4 address, such as exact match and range match.";
Jeong, et al. Expires May 7, 2020 [Page 24]
Internet-Draft Consumer-Facing Interface YANG Data Model November 2019
choice match-type {
description
"User can choose between 'exact match' and 'range match'.";
case exact-match-ipv4 {
uses ipv4;
description
"Exact ip-address match for ipv4 type addresses";
}
case exact-match-ipv6 {
uses ipv6;
description
"Exact ip-address match for ipv6 type addresses";
}
case range-match-ipv4 {
list range-ipv4-address {
key "start-ipv4-address end-ipv4-address";
leaf start-ipv4-address {
type inet:ipv4-address;
description
"Start IPv4 address for a range match.";
}
leaf end-ipv4-address {
type inet:ipv4-address;
description
"End IPv4 address for a range match.";
}
description
"Range match for an IP-address.";
}
}
case range-match-ipv6 {
list range-ipv6-address {
key "start-ipv6-address end-ipv6-address";
leaf start-ipv6-address {
type inet:ipv6-address;
description
"Start IPv6 address for a range match.";
}
leaf end-ipv6-address {
type inet:ipv6-address;
description
"End IPv6 address for a range match.";
}
description
"Range match for an IP-address.";
}
}
}
Jeong, et al. Expires May 7, 2020 [Page 25]
Internet-Draft Consumer-Facing Interface YANG Data Model November 2019
}
grouping ipsec-based-method {
description
"This represents the ipsec-based method.";
list ipsec-method {
key "method";
description
"This represents the list of IPsec method types.";
leaf method {
type identityref {
base i2nsf-ipsec;
}
description
"This represents IPsec IKE and IPsec IKEless cases.";
}
}
}
grouping user-group {
description
"The grouping for user-group entities, and
contains information such as name & ip-address.";
leaf-list name {
type leafref {
path /nacm:nacm/nacm:groups/nacm:group/nacm:user-name;
}
description
"This represents the name of a user.";
}
uses ip-address-info;
}
grouping device-group {
description
"This group represents device group information
such as ip-address protocol.";
leaf name {
type string;
description
"This represents the name of a device.";
}
uses ip-address-info;
leaf-list protocol {
type identityref {
base protocol-type;
}
Jeong, et al. Expires May 7, 2020 [Page 26]
Internet-Draft Consumer-Facing Interface YANG Data Model November 2019
description
"This represents the communication protocols of devices.";
}
}
grouping location-group {
description
"This group represents location-group information
such as geo-ip and continent.";
leaf name {
type string;
description
"This represents the name of a location.";
}
leaf geo-ip-ipv4 {
type inet:ipv4-address;
description
"This represents the IPv4 geo-ip of a location.";
}
leaf geo-ip-ipv6 {
type inet:ipv6-address;
description
"This represents the IPv6 geo-ip of a location.";
}
leaf continent {
type identityref {
base continent;
}
description
"location-group-based on geo-ip of
respective continent.";
}
}
grouping threat-feed-info {
description
"This is the grouping for the threat-feed-list";
leaf feed-name {
type identityref {
base threat-feed-type;
}
description
"This represents the name of the a threat-feed.";
}
leaf feed-server-ipv4 {
type inet:ipv4-address;
description
Jeong, et al. Expires May 7, 2020 [Page 27]
Internet-Draft Consumer-Facing Interface YANG Data Model November 2019
"The IPv4 ip-address for the threat-feed server.";
}
leaf feed-server-ipv6 {
type inet:ipv6-address;
description
"The IPv6 ip-address for the threat-feed server.";
}
leaf feed-description {
type string;
description
"This represents the descriptions of a threat-feed.
The description should include information, such as
the type, related threat, method, and file type.";
}
}
grouping payload-string {
description
"The grouping for payload-string content.
It contains information such as name and string content.";
leaf payload-description {
type string;
description
"This represents the description of a payload.";
}
leaf-list content {
type string;
description
"This represents the payload string content.";
}
}
grouping owners-ref {
description
"This grouping is for owners reference using Network configuration Access Control Model (NACM).";
leaf-list owners {
type leafref {
path /nacm:nacm/nacm:groups/nacm:group/nacm:name;
}
description
"This leaf-list names the owner groups of the
list instace it sits on. Only the owners and
super users are authorized to modify the contents.";
}
}
list i2nsf-cfi-policy {
Jeong, et al. Expires May 7, 2020 [Page 28]
Internet-Draft Consumer-Facing Interface YANG Data Model November 2019
key "policy-name";
description
"This is the security policy list. Each policy in the list
contains a list of security rules, and is a policy instance
to have complete information such as where and when a
policy needs to be applied.";
leaf policy-name {
type string;
mandatory true;
description
"The name which identifies the policy.";
}
uses owners-ref;
container rule{
description
"This container is for rules.";
nacm:default-deny-write;
list rule {
leaf rule-name {
type string;
mandatory true;
description
"This represents the name for the rule.";
}
key "rule-name";
description
"There can be a single or multiple number of rules.";
uses owners-ref;
container event {
description
"This represents the event (e.g., a security event,
which a security rule is made for.)";
leaf security-event {
type identityref {
base security-event-type;
}
mandatory true;
description
"This contains the description of security events.";
}
choice enforce-type {
description
"There are three different enforcement types; admin, and time.";
case enforce-admin {
leaf admin {
type identityref {
Jeong, et al. Expires May 7, 2020 [Page 29]
Internet-Draft Consumer-Facing Interface YANG Data Model November 2019
base enforce-type;
}
description
"This represents the enforcement type based on admin's
decision.";
}
}
case time {
container time-information {
description
"The begin-time and end-time information
when the security rule should be applied.";
leaf enforce-time {
type identityref {
base enforce-type;
}
description
"The enforcement type is time-enforced.";
}
leaf begin-time {
type yang:date-and-time;
description
"This is start time for time zone";
}
leaf end-time {
type yang:date-and-time;
description
"This is end time for time zone";
}
}
}
}
leaf frequency {
type enumeration {
enum only-once {
description
"This represents the rule is enforced only once.";
}
enum daily {
description
"This represents the rule is enforced on a daily basis.";
}
enum weekly {
description
"This represents the rule is enforced on a weekly basis.";
}
enum monthly {
description
Jeong, et al. Expires May 7, 2020 [Page 30]
Internet-Draft Consumer-Facing Interface YANG Data Model November 2019
"This represents the rule is enforced on a monthly basis.";
}
}
default only-once;
description
"This represents how frequent the rule should be enforced.";
}
}
container condition {
description
"The conditions for general security policies.";
choice condition {
description
"This choice condition is for general firewall.";
case firewall-condition {
description
"The general firewall condition.";
container firewall-source {
description
"This represents the source.";
leaf src-target {
type leafref {
path /nacm:nacm/nacm:groups/nacm:group/nacm:user-name;
}
mandatory true;
description
"This describes the paths to
the source reference.";
}
}
container firewall-destination {
description
"This represents the destination.";
leaf-list dest-target {
type leafref {
path /nacm:nacm/nacm:groups/nacm:group/nacm:user-name;
}
description
"This describes the paths to the
destination target reference.";
}
}
}
case ddos-condition {
description
"The condition for DDoS mitigation.";
container ddos-source {
description
Jeong, et al. Expires May 7, 2020 [Page 31]
Internet-Draft Consumer-Facing Interface YANG Data Model November 2019
"This represents the source.";
leaf-list src-target {
type leafref {
path "/i2nsf-cfi-policy/endpoint-group/device-group/name";
}
description
"This describes the path to the
source target references.";
}
}
container ddos-destination {
description
"This represents the target.";
leaf-list dest-target {
type leafref {
path "/i2nsf-cfi-policy/endpoint-group/device-group/name";
}
description
"This describes the path to the
destination target references.";
}
}
container rate-limit {
description "This describes the rate-limit.";
leaf packet-per-second {
type uint16;
description
"The rate-limit limits the amount of incoming packets.";
}
}
}
case custom-condition {
description
"The condition based on packet contents.";
container custon-source {
description
"This represents the source.";
leaf-list src-target {
type leafref {
path "/i2nsf-cfi-policy/threat-prevention/payload-content/name";
}
description
"Describes the payload string
content condition source.";
}
}
container custom-destination {
description
Jeong, et al. Expires May 7, 2020 [Page 32]
Internet-Draft Consumer-Facing Interface YANG Data Model November 2019
"This represents the destination.";
leaf dest-target {
type leafref {
path "/i2nsf-cfi-policy/threat-prevention/payload-content/name";
}
mandatory true;
description
"Describes the payload string
content condition destination.";
}
}
}
case threat-feed-condition {
description
"The condition based on the threat-feed information.";
container threat-feed-source {
description
"This represents the source.";
leaf-list src-target {
type leafref {
path "/i2nsf-cfi-policy/threat-prevention/threat-feed-list/feed-name";
}
description "Describes the threat-feed
condition source.";
}
}
container threat-feed-destination {
description
"This represents the destination.";
leaf dest-target {
type leafref {
path "/i2nsf-cfi-policy/threat-prevention/threat-feed-list/feed-name";
}
mandatory true;
description "Describes the threat-feed
condition destination.";
}
}
}
}
}
container action {
description
"This is the action container.";
leaf primary-action {
type identityref {
base primary-action;
}
Jeong, et al. Expires May 7, 2020 [Page 33]
Internet-Draft Consumer-Facing Interface YANG Data Model November 2019
mandatory true;
description
"This represent the primary actions (e.g., PASS, DROP,
ALERT, and MIRROR) to be applied a condition.";
}
leaf secondary-action {
type identityref {
base secondary-action;
}
description
"This represents the secondary actions (e.g., log
and syslog) to be applied if needed.";
}
}
container ipsec-method {
description
"This container represents the IPsec IKE and IKEless cases.";
leaf method {
type identityref {
base i2nsf-ipsec;
}
description
"This references the IPsec method types,
which includes IPsec IKE and IPsec IKEless cases.";
}
}
leaf owner {
type identityref {
base owner;
}
mandatory true;
description
"This field defines the owner of this
rule. Only the owner is authorized to
modify the contents of the rule.";
}
}
}
container endpoint-group {
description
"A logical entity in their business
environment, where a security policy
is to be applied.";
uses user-group;
list device-group {
key "name";
uses device-group;
description
Jeong, et al. Expires May 7, 2020 [Page 34]
Internet-Draft Consumer-Facing Interface YANG Data Model November 2019
"This represents the device group.";
}
list location-group{
key "name";
uses location-group;
description
"This represents the location group.";
}
}
container threat-prevention {
description
"this describes the list of threat-prevention.";
list threat-feed-list {
key "feed-name";
description
"This represents the threat feed list.";
uses threat-feed-info;
leaf-list threat-file-types {
type identityref {
base malware-file-type;
}
default executable-file;
description
"This contains a list of file types needed to
be scanned for the virus.";
}
leaf-list signatures {
type identityref {
base signature-type;
}
default signature-suricata;
description
"This contains a list of signatures or hash
of the threats.";
}
}
list payload-content {
key "name";
leaf name {
type string;
description
"This represents the name of payload-content.
It should give an idea of why specific payload
content is marked as threat. For example, the name
'backdoor' indicates the payload content is related
Jeong, et al. Expires May 7, 2020 [Page 35]
Internet-Draft Consumer-Facing Interface YANG Data Model November 2019
to backdoor attack.";
}
description
"This represents the payload-string group.";
uses payload-string;
}
}
}
}
<CODE ENDS>
Figure 16: YANG for Consumer-Facing Interface
9. XML Configuration Examples of High-Level Security Policy Rules
This section shows XML configuration examples of high-level security
policy rules that are delivered from the I2NSF User to the Security
Controller over the Consumer-Facing Interface. The considered use
cases are: Database registration, time-based firewall for web
filtering, VoIP/VoLTE security service, and DDoS-attack mitigation.
9.1. Database Registration: Information of Positions and Devices
(Endpoint Group)
If new endpoints are introduced to the network, it is necessary to
first register their data to the database. For example, if new
members are newly introduced in either of three different groups
(i.e., user-group, device-group, and payload-group), each of them
should be registered with information such as ip-addresses or
protocols used by devices. Figure 17 shows an example XML
representation of the registered information for the user-group and
device-group.
Jeong, et al. Expires May 7, 2020 [Page 36]
Internet-Draft Consumer-Facing Interface YANG Data Model November 2019
<?xml version="1.0" encoding="UTF-8" ?>
<endpoint-group xmlns="urn:ietf:params:xml:ns:yang:ietf-i2nsf-cfi-policy">
<user-group>
<name>employees</name>
<range-ip-address>
<start-ip-address>221.159.112.1</start-ip-address>
<end-ip-address>221.159.112.90</end-ip-address>
</range-ip-address>
</user-group>
<device-group>
<name>webservers</name>
<range-ip-address>
<start-ip-address>221.159.112.91</start-ip-address>
<end-ip-address>221.159.112.97</end-ip-address>
</range-ip-address>
<protocol>http</protocol>
<protocol>https</protocol>
</device-group>
</endpoint-group xmlns="urn:ietf:params:xml:ns:yang:ietf-i2nsf-cfi-policy">
Figure 17: Registering User-group and Device-group Information
9.2. Scenario 1: Block SNS Access during Business Hours
The first example scenario is to "block SNS access during office
hours" using a time-based firewall policy. In this scenario, all
users registered as "employees" in the user-group list are unable to
access Social Networking Services (SNS) during the office hours. The
XML instance is described below:
Jeong, et al. Expires May 7, 2020 [Page 37]
Internet-Draft Consumer-Facing Interface YANG Data Model November 2019
<?xml version="1.0" encoding="UTF-8" ?>
<policy xmlns="urn:ietf:params:xml:ns:yang:ietf-i2nsf-cfi-policy">
<policy-name>security_policy_for_blocking_sns</policy-name>
<rule>
<rule-name>block_access_to_sns_during_office_hours</rule-name>
<event>
<time-information>
<begin-time>09:00</begin-time>
<end-time>18:00</end-time>
</time-information>
</event>
<condition>
<firewall-condition>
<source-target>
<src-target>employees</src-target>
</source-target>
</firewall-condition>
<custom-condition>
<destination-target>
<dest-target>sns-websites</dest-target>
</destination-target>
</custom-condition>
</condition>
<action>
<primary-action>drop</primary-action>
</action>
<ipsec-method>
<method>ipsec-ike</method>
</ipsec-method>
</rule>
</policy xmlns="urn:ietf:params:xml:ns:yang:ietf-i2nsf-cfi-policy">
Figure 18: An XML Example for Time-based Firewall
Time-based-condition Firewall
1. The policy name is "security_policy_for_blocking_sns".
2. The rule name is "block_access_to_sns_during_office_hours".
3. The Source-target is "employees".
4. The destination target is "sns-websites". "sns-websites" is the
key which represents the list containing the information, such as
URL, about sns-websites.
5. The action required is to "drop" any attempt to connect to
websites related to Social networking.
Jeong, et al. Expires May 7, 2020 [Page 38]
Internet-Draft Consumer-Facing Interface YANG Data Model November 2019
6. The IPsec method type used for nsf traffic steering is set to
"ipsec-ike".
9.3. Scenario 2: Block Malicious VoIP/VoLTE Packets Coming to a Company
The second example scenario is to "block malicious VoIP/VoLTE packets
coming to a company" using a VoIP policy. In this scenario, the
calls comming from from VOIP and/or VOLTE sources with VOLTE IDs that
are classified as malicious are dropped. The IP addresses of the
employees and malicious VOIP IDs should be blocked are stored in the
database or datastore of the enterprise. Here and the rest of the
cases assume that the security administrators or someone responsible
for the existing and newly generated policies, are not aware of which
and/or how many NSFs are needed to meet the security requirements.
Figure 19 represents the XML document generated from YANG discussed
in previous sections. Once a high-level seucurity policy is created
by a security admin, it is delivered by the Consumer-Facing
Interface, through RESTCONF server, to the security controller. The
XML instance is described below:
<?xml version="1.0" encoding="UTF-8" ?>
<policy xmlns="urn:ietf:params:xml:ns:yang:ietf-i2nsf-cfi-policy">
<policy-name>security_policy_for_blocking_malicious_voip_packets</policy-name>
<rule>
<rule-name>Block_malicious_voip_and_volte_packets</rule-name>
<condition>
<custom-condition>
<source-target>
<src-target>malicious-id</src-target>
</source-target>
</custom-condition>
<firewall-condition>
<destination-target>
<dest-target>employees</dest-target>
</destination-target>
</firewall-condition>
</condition>
<action>
<primary-action>drop</primary-action>
</action>
<ipsec-method>
<method>ipsec-ikeless</method>
</ipsec-method>
</rule>
</policy xmlns="urn:ietf:params:xml:ns:yang:ietf-i2nsf-cfi-policy">
Figure 19: An XML Example for VoIP Security Service
Jeong, et al. Expires May 7, 2020 [Page 39]
Internet-Draft Consumer-Facing Interface YANG Data Model November 2019
Custom-condition Firewall
1. The policy name is
"security_policy_for_blocking_malicious_voip_packets".
2. The rule name is "Block_malicious_voip_and_volte_packets".
3. The Source-target is "malicious-id". This can be a single ID or
a list of IDs, depending on how the ID are stored in the
database. The "malicious-id" is the key so that the security
admin can read every stored malicious VOIP IDs that are named as
"malicious-id".
4. The destination target is "employees". "employees" is the key
which represents the list containing information about employees,
such as IP addresses.
5. The action required is "drop" when any incoming packets are from
"malicious-id".
6. The IPsec method used for nsf traffic steering is set to "ipsec-
ikeless".
9.4. Scenario 3: Mitigate HTTP and HTTPS Flood Attacks on a Company Web
Server
The third example scenario is to "Mitigate HTTP and HTTPS flood
attacks on a company web server" using a DDoS-attack mitigation
policy. Here, the time information is not set because the service
provided by the network should be maintained at all times. If the
packets sent by any sources are more than the set threshold, then the
admin can set the percentage of the packets to be dropped to safely
maintain the service. In this scenario, the source is set as "any"
to block any sources which send abnormal amount of packets. The
destination is set as "web_server01". Once the rule is set and
delivered and enforced to the nsfs by the securiy controller, the
NSFs will monitor the incoming packet amounts and the destination to
act according to the rule set. The XML instance is described below:
Jeong, et al. Expires May 7, 2020 [Page 40]
Internet-Draft Consumer-Facing Interface YANG Data Model November 2019
<?xml version="1.0" encoding="UTF-8" ?>
<policy xmlns="urn:ietf:params:xml:ns:yang:ietf-i2nsf-cfi-policy">
<policy-name>security_policy_for_ddos_attacks</policy-name>
<rule>
<rule-name>100_packets_per_second</rule-name>
<condition>
<ddos-condition>
<destination-target>
<dest-target>webservers</dest-target>
</destination-target>
<rate-limit>
<packet-per-second>100</packet-per-second>
</rate-limit>
</ddos-condition>
</condition>
<action>
<primary-action>drop</primary-action>
</action>
<ipsec-method>
<method>ipsec-ikeless</method>
</ipsec-method>
</rule>
</policy xmlns="urn:ietf:params:xml:ns:yang:ietf-i2nsf-cfi-policy">
Figure 20: An XML Example for DDoS-attack Mitigation
DDoS-condition Firewall
1. The policy name is "security_policy_for_ddos_attacks".
2. The rule name is "100_packets_per_second".
3. The destination target is "webservers". "webservers" is the key
which represents the list containing information, such as IP
addresses and ports, about web-servers.
4. The rate limit exists to limit the incoming amount of packets per
second. In this case the rate limit is "100" packets per second.
This amount depends on the packet receiving capacity of the
server devices.
5. The Source-target is all sources which send abnormal amount of
packets.
6. The action required is to "drop" packet reception is more than
100 packets per second.
Jeong, et al. Expires May 7, 2020 [Page 41]
Internet-Draft Consumer-Facing Interface YANG Data Model November 2019
7. The IPsec method used for nsf traffic steering is set to "ipsec-
ike".
10. Security Considerations
The data model for the I2NSF Consumer-Facing Interface is based on
the I2NSF framework [RFC8329], so the same security considerations
with the I2NSF framework should be included in this document. The
data model needs a secure communication channel to protect the
Consumer-Facing Interface between the I2NSF User and Security
Controller.
11. IANA Considerations
This document requests IANA to register the following URI in the
"IETF XML Registry" [RFC3688]:
URI: urn:ietf:params:xml:ns:yang:ietf-i2nsf-cfi-policy
Registrant Contact: The I2NSF.
XML: N/A; the requested URI is an XML namespace.
This document requests IANA to register the following YANG module in
the "YANG Module Names" registry [RFC7950].
name: ietf-i2nsf-cfi-policy
namespace: urn:ietf:params:xml:ns:yang:ietf-i2nsf-cfi-policy
prefix: cfi-policy
reference: RFC 7950
12. Acknowledgments
This work was supported by Institute of Information & Communications
Technology Planning & Evaluation (IITP) grant funded by the Korea
MSIT (Ministry of Science and ICT) (R-20160222-002755, Cloud based
Security Intelligence Technology Development for the Customized
Security Service Provisioning).
13. Contributors
This document is made by the group effort of I2NSF working group.
Many people actively contributed to this document, such as Mahdi F.
Dachmehchi and Daeyoung Hyun. The authors sincerely appreciate their
contributions.
The following are co-authors of this document:
Jeong, et al. Expires May 7, 2020 [Page 42]
Internet-Draft Consumer-Facing Interface YANG Data Model November 2019
Hyoungshick Kim
Department of Computer Science and Engineering
Sungkyunkwan University
2066 Seo-ro Jangan-gu
Suwon, Gyeonggi-do 16419
Republic of Korea
EMail: hyoung@skku.edu
Eunsoo Kim
Department of Electronic, Electrical and Computer Engineering
Sungkyunkwan University
2066 Seo-ro Jangan-gu
Suwon, Gyeonggi-do 16419
Republic of Korea
EMail: eskim86@skku.edu
Seungjin Lee
Department of Electronic, Electrical and Computer Engineering
Sungkyunkwan University
2066 Seo-ro Jangan-gu
Suwon, Gyeonggi-do 16419
Republic of Korea
EMail: jine33@skku.edu
Jinyong Tim Kim
Department of Electronic, Electrical and Computer Engineering
Sungkyunkwan University
2066 Seo-ro Jangan-gu
Suwon, Gyeonggi-do 16419
Republic of Korea
EMail: timkim@skku.edu
Anil Lohiya
Juniper Networks
1133 Innovation Way
Sunnyvale, CA 94089
US
EMail: alohiya@juniper.net
Jeong, et al. Expires May 7, 2020 [Page 43]
Internet-Draft Consumer-Facing Interface YANG Data Model November 2019
Dave Qi
Bloomberg
731 Lexington Avenue
New York, NY 10022
US
EMail: DQI@bloomberg.net
Nabil Bitar
Nokia
755 Ravendale Drive
Mountain View, CA 94043
US
EMail: nabil.bitar@nokia.com
Senad Palislamovic
Nokia
755 Ravendale Drive
Mountain View, CA 94043
US
EMail: senad.palislamovic@nokia.com
Liang Xia
Huawei
101 Software Avenue
Nanjing, Jiangsu 210012
China
EMail: Frank.Xialiang@huawei.com
14. References
14.1. Normative References
[RFC3444] Pras, A. and J. Schoenwaelder, "On the Difference between
Information Models and Data Models", RFC 3444,
DOI 10.17487/RFC3444, January 2003,
<https://www.rfc-editor.org/info/rfc3444>.
[RFC3688] Mealling, M., "The IETF XML Registry", BCP 81, RFC 3688,
DOI 10.17487/RFC3688, January 2004,
<https://www.rfc-editor.org/info/rfc3688>.
Jeong, et al. Expires May 7, 2020 [Page 44]
Internet-Draft Consumer-Facing Interface YANG Data Model November 2019
[RFC6020] Bjorklund, M., Ed., "YANG - A Data Modeling Language for
the Network Configuration Protocol (NETCONF)", RFC 6020,
DOI 10.17487/RFC6020, October 2010,
<https://www.rfc-editor.org/info/rfc6020>.
[RFC6991] Schoenwaelder, J., Ed., "Common YANG Data Types",
RFC 6991, DOI 10.17487/RFC6991, July 2013,
<https://www.rfc-editor.org/info/rfc6991>.
[RFC7950] Bjorklund, M., Ed., "The YANG 1.1 Data Modeling Language",
RFC 7950, DOI 10.17487/RFC7950, August 2016,
<https://www.rfc-editor.org/info/rfc7950>.
[RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
May 2017, <https://www.rfc-editor.org/info/rfc8174>.
[RFC8192] Hares, S., Lopez, D., Zarny, M., Jacquenet, C., Kumar, R.,
and J. Jeong, "Interface to Network Security Functions
(I2NSF): Problem Statement and Use Cases", RFC 8192,
DOI 10.17487/RFC8192, July 2017,
<https://www.rfc-editor.org/info/rfc8192>.
[RFC8329] Lopez, D., Lopez, E., Dunbar, L., Strassner, J., and R.
Kumar, "Framework for Interface to Network Security
Functions", RFC 8329, DOI 10.17487/RFC8329, February 2018,
<https://www.rfc-editor.org/info/rfc8329>.
[RFC8340] Bjorklund, M. and L. Berger, Ed., "YANG Tree Diagrams",
BCP 215, RFC 8340, DOI 10.17487/RFC8340, March 2018,
<https://www.rfc-editor.org/info/rfc8340>.
[RFC8341] Bierman, A. and M. Bjorklund, "Network Configuration
Access Control Model", STD 91, RFC 8341,
DOI 10.17487/RFC8341, March 2018,
<https://www.rfc-editor.org/info/rfc8341>.
[RFC8407] Bierman, A., "Guidelines for Authors and Reviewers of
Documents Containing YANG Data Models", BCP 216, RFC 8407,
DOI 10.17487/RFC8407, October 2018,
<https://www.rfc-editor.org/info/rfc8407>.
14.2. Informative References
Jeong, et al. Expires May 7, 2020 [Page 45]
Internet-Draft Consumer-Facing Interface YANG Data Model November 2019
[client-facing-inf-req]
Kumar, R., Lohiya, A., Qi, D., Bitar, N., Palislamovic,
S., and L. Xia, "Requirements for Client-Facing Interface
to Security Controller", draft-ietf-i2nsf-client-facing-
interface-req-05 (work in progress), May 2018.
[i2nsf-capability-im]
Xia, L., Strassner, J., Basile, C., and D. Lopez,
"Information Model of NSFs Capabilities", draft-ietf-
i2nsf-capability-05 (work in progress), April 2019.
[i2nsf-ipsec]
Marin-Lopez, R., Lopez-Millan, G., and F. Pereniguez-
Garcia, "Software-Defined Networking (SDN)-based IPsec
Flow Protection", draft-ietf-i2nsf-sdn-ipsec-flow-
protection-07 (work in progress), August 2019.
[i2nsf-terminology]
Hares, S., Strassner, J., Lopez, D., Xia, L., and H.
Birkholz, "Interface to Network Security Functions (I2NSF)
Terminology", draft-ietf-i2nsf-terminology-08 (work in
progress), July 2019.
Jeong, et al. Expires May 7, 2020 [Page 46]
Internet-Draft Consumer-Facing Interface YANG Data Model November 2019
Appendix A. Changes from draft-ietf-i2nsf-consumer-facing-interface-
dm-06
The following changes are made from draft-ietf-i2nsf-consumer-facing-
interface-dm-06:
o This version has reflected the comments from Jan Lindblad.
o In Section 1, Figure 1 is modified such that "Multi-Tenancy" is
deleted because "Multi-Tenancy" can be described by "Endpoint
Groups" in a policy rule.
o In Section 4, Figure 2 is modified such that the YANG data model
of a policy having at least one rule has a hierarchical structure
rather than a flat structure by deleing the "Multi-Tenancy" field.
o The section named "Information Model for Multi-Tenancy" is
deleted. The multi-tenancy can be specified by "Endpoint Groups"
along with "Network Configuration Access Control Model (NACM)"
mechanisms.
o In Section 5.1, "NACM" is applied in "user-group" and for its
access control.
o In Section 5.2, Figure 10 is modified because the "protocol" field
was missed in the previous version.
o Section 7 is added as "Network Configuration Access Control Model
(NACM)" in order to provide the Consumer-Facing Interface with the
existing access control mechanisms. Also, the reference of
[RFC8341] is added for NACM.
o The section named "Role-based Access Control (RBAC)" is deleted
since this access control can be replaced by "NACM".
o In Section 8, the YANG data module is modified according to the
above changes.
Authors' Addresses
Jeong, et al. Expires May 7, 2020 [Page 47]
Internet-Draft Consumer-Facing Interface YANG Data Model November 2019
Jaehoon Paul Jeong
Department of Computer Science and Engineering
Sungkyunkwan University
2066 Seobu-Ro, Jangan-Gu
Suwon, Gyeonggi-Do 16419
Republic of Korea
Phone: +82 31 299 4957
Fax: +82 31 290 7996
EMail: pauljeong@skku.edu
URI: http://iotlab.skku.edu/people-jaehoon-jeong.php
Chaehong Chung
Department of Electronic, Electrical and Computer Engineering
Sungkyunkwan University
2066 Seobu-Ro, Jangan-Gu
Suwon, Gyeonggi-Do 16419
Republic of Korea
Phone: +82 31 299 4957
EMail: darkhong@skku.edu
Tae-Jin Ahn
Korea Telecom
70 Yuseong-Ro, Yuseong-Gu
Daejeon 305-811
Republic of Korea
Phone: +82 42 870 8409
EMail: taejin.ahn@kt.com
Rakesh Kumar
Juniper Networks
1133 Innovation Way
Sunnyvale, CA 94089
USA
EMail: rkkumar@juniper.net
Jeong, et al. Expires May 7, 2020 [Page 48]
Internet-Draft Consumer-Facing Interface YANG Data Model November 2019
Susan Hares
Huawei
7453 Hickory Hill
Saline, MI 48176
USA
Phone: +1-734-604-0332
EMail: shares@ndzh.com
Jeong, et al. Expires May 7, 2020 [Page 49]